RESUMO
Numerous research showed that mulching with conventional agro foils elevates soil temperature and promotes plant growth, but negatively influences soil health and brings environmental concerns. Most of the published research on nonwoven mulches for plant cultivation includes nonwoven fabrics produced by extrusion processes providing nonwoven fabric structures similar to films. A limited number of studies investigate the impact of nonwoven mulches produced by a mechanical process on the cards and bonded by needling on plant cultivation. For this study, nonwoven mulches of mass per unit area of 400 g m-2 made from jute, hemp, viscose (CV), and polylactide (PLA) fibers were produced on the card bonded by needle punching. The field experiment was conducted two consecutive years in a row, in spring 2022 and 2023, by planting lettuce seedlings. The nonwoven mulches maintain lower temperatures and higher soil moisture levels compared to agro foil and the control field. The fibrous structure and their water absorption properties allow natural ventilation, regulating temperatures and retaining moisture of soil, consequently improving soil quality, lettuce yield, and quality. The fiber type from which the mulches were produced, influenced soil temperature and humidity, soil quality, and lettuce cultivation. The nonwoven mulches were successful in weed control concerning the weediness of the control field. Based on the obtained results, the newly produced mulches are likely to yield better results when used for the cultivation of vegetables with longer growing periods. Newly produced biodegradable nonwoven mulches could be an eco-friendly alternative to traditional agro foil, minimizing environmental harm during decomposition. The obtained results suggest that the newly produced mulches would be even more suitable for growing vegetables with longer growing seasons.
RESUMO
The performance and degradation of nonwoven mulches made from viscose, jute, hemp fibers, and their blends with PLA fibers, subjected to field conditions, are investigated. This research explores the possible substitution of traditional agricultural polyethylene mulching agro foil with environmentally friendly biodegradable nonwoven mulches produced from blends of jute, hemp, and viscose fibers along with PLA fibers. The nonwoven mulches underwent a ten-month exposure to field conditions, showing varied degradation. The jute and hemp nonwoven mulches degraded completely within the test period, whereas their blends with PLA fibers exhibited slowed degradation. This study indicated that PLA fibers in blends with jute, hemp, and viscose mulches slowed degradation, impacting their structural integrity and tensile properties. The tensile properties of nonwoven mulches blended with 20% of PLA fibers increased the breaking forces after field exposure. Observations on structural changes through microscopy highlighted the structure maintenance in jute and hemp blends due to the non-degraded PLA fibers, contrasting the complete degradation of 100% jute and hemp mulches. A microscopic analysis revealed alterations in the fiber structure and density changes, particularly in viscose mulches and their blends with PLA fibers. Soil temperature variations were observed under different mulches; e.g., agro foil consistently exhibited higher temperatures compared to nonwoven mulches. Notably, the hemp and jute/PLA blend mulches showed slightly elevated temperatures, while the viscose-based mulches consistently revealed the lowest temperatures. Regarding soil moisture, the nonwoven mulches generally maintained higher moisture levels compared to the control field and agro foil from June to October. These findings suggest that nonwoven mulches effectively preserved soil moisture during critical growth periods, potentially positively impacting plant growth. The weed suppression capabilities varied among mulches, with hemp mulch initially displaying the lowest suppression ability in the first six months. The addition of 20% of PLA fibers in mulch blends with viscose, jute, and hemp notably improved the weed control capabilities. Understanding the impacts of field conditions on newly produced nonwoven mulches is crucial for optimizing mulch selection in agricultural practices to enhance soil conditions and weed management.
RESUMO
The need for sustainable alternatives to conventional plastic mulches in agriculture has led to the development of various types of biodegradable mulches made from natural fibres and biopolymers to reduce environmental pollution and mitigate soil pollution caused by conventional plastic mulch usage. Degradation, impact on soil temperature and humidity, and weed suppression properties of needle-punched nonwoven mulches of different mass per unit area, made of jute, hemp, viscose, and PLA biopolymer, are investigated. Their biodegradation is determined by changes in the mulch properties (mass per unit area, thickness, air permeability, tensile properties, microscopic images, and FTIR analyses) during 300 days of exposure to the environmental conditions in the period from May 2022 to February 2023. The change in mass per unit area, thickness, air permeability, and tensile properties of nonwoven mulches did not show a tendency to degrade during exposure to environmental conditions. The microscopic and FTIR analysis showed the degradation of the fibres from the mulches during the exposure time to a certain extent. The environmental conditions influence the change in the dimensions of the mulches (shrinkage and expansion)-which impact periodically tested mass results per unit area-as well as their thickness and air permeability. The nonwoven mulches provide higher temperatures compared to bare soil, though not as high as those observed beneath traditional agricultural foil. When comparing the humidity in bare soil and soil covered by mulches during the plant growth period (June to October), it was found that soil humidity was higher beneath all mulches. The nonwoven mulches provide superior soil moisture retention compared to conventionally used agrofoil. Almost all nonwoven mulches effectively suppressed weed growth, except hemp mulches. The newly produced mulches have the potential to replace traditional agrofoil, offering improved conditions for plant growth, effective weed control, and faster degradation without causing harm to the environment.
RESUMO
This paper investigates the biodegradation properties of cellulose fibers and PLA biopolymer. For that purpose, hemp, jute, and sisal fibers as lignocellulose fibers; viscose fibers (CV) as regenerated cellulose; and polylactide (PLA) as biopolymer were buried in farmland soil for periods of 2, 4, 7, 9 and 11 days under controlled conditions. The influence of their biodegradation on the fiber mechanical properties, bacteria and fungi population, as well as on the soil quality were investigated. After exposure to microorganisms, analyses of the fibers' morphological (SEM), chemical (FTIR), and thermal (TGA) properties were conducted to achieve a comprehensive understanding of their biodegradability. The analysis concluded that lignin and pectin content have a greater impact on the biodegradation of hemp, jute, and sisal fibers than factors like crystallinity and degree of polymerization. The viscose fibers showed lower biodegradability despite their lower degree of polymerization, indicating a resistance to biodegradation due to the "skin" formed during the spinning process. PLA fibers experienced chemical hydrolysis and significant microbial attack, resulting in reduced tenacity. The acquired findings yield valuable insights into the biodegradability of the fibers, thereby facilitating the selection of appropriate fibers for the development of environmentally sustainable products. Notably, a literature review revealed a paucity of research on fiber biodegradability, underscoring the significance of the present study's contributions.
RESUMO
As society becomes more aware of environmental pollution, global warming, and environmental disasters, people are increasingly turning to sustainable materials and products. This includes agrotextiles in a wide range of products, including nonwoven agrotextiles for mulching. This review provides insight into relevant available data and information on the condition, possibilities, and trends of nonwoven mulches from natural fibres, biopolymers, and recycled sources. The basic definitions and differences between biodegradation and composting processes are explained, and the current standards related to biodegradation are presented. In addition, an insight into the biodegradation of various nonwoven mulches and films, including their advantages and disadvantages, is provided, to predict the future directions of nonwoven mulches development.
